The Atwood Stainless Steel Electric Water Heaters are designed to heat water quickly and efficiently to deliver every possible ounce of water from the tank.
Atwood's engineering, manufacturing and application expertise have been honed by time and the experience of supplying millions of water heaters to the recreation vehicle market for more than 30 years. Almost 20 years ago, Atwood applied this specialized knowledge to meet the needs of the marine industry. In doing so, we designed the water heaters that have become the standard in the boating industry.
Atwood water heaters have been designed not only to heat water quickly and efficiently, but to also deliver every ounce of usable hot water possible from the tank. Atwood water heaters perform reliably, assuring customer satisfaction and full use of hot water benefits designed in your pleasure boats.
Safe and efficient heat exchangers
To quickly heat water when under power, Atwood has developed efficient heat exchangers. Each heat exchanger is specifically designed for the water heater's capacity resulting in heat up times superior to competitive models. These heat exchangers ensure safety by using a unique double tube construction which prevents any possibility of engine coolant contaminating the fresh water system.
Corrosion resistant construction
The casing of every Atwood electric water heater is constructed from corrosion resistant materials and the non stainless steel models are carefully painted to stand up against the most corrosive marine environments. Special attention to detail on edges and corners helps assure greater handling safety. The Atwood tank is constructed of high strength aluminum core with a bonded corrosion fighting cladding material on the interior surface to assure a long life. This eliminates the need for an anode and it's annual replacement.
Designed for installation flexibility
The cubic shape and lightweight aluminum-alloy tank offers greater flexibility for water heater location in floor plans.
Atwood marine water heaters offer substantial weight savings
Through the years, Atwood has advanced the technology and the application of highly specialized aluminum alloys used in forming the tanks of our water heaters. This technology delivers superior tank life, while allowing us to maintain substantial weight savings over all competitive models and greater design flexibility in location of the water heater for boat manufacturers. All 110V marine water heaters have a recovery rate of 8.2 gallons per hour.
|Image||Part #||Product Description||Price||Stock||Order|
|94610||Stainless steel electric water heater with heat exchanger, 6 gallon capacity, 110V||
|94605||Stainless steel electric water heater with heat exchanger, 6 gallon capacity, 220V||
Usually ships in 1-2 weeks
|94575||Stainless steel water heater, 11 gallon capacity, 220V||
Usually ships in 1-2 weeks
Microscopic beads and fabrics float in our waterways, get ingested by fish and other creatures, and impact the environment in lots of negative ways. But despite that knowledge, there is little we know about how these microplastics first enter aquatic food webs. In a pilot study, researchers at the University of Notre Dame are studying the dynamics of just how microscopic plastics are first transferred from filter feeders to fish. Their investigation is using asian clams and sculpins to pinpoint the interactions underway. The researchers originally wanted to use round gobies, a prolific invasive fish in Lake Erie.Read More
In sediment samples taken throughout the world’s oceans, researchers key on shell fragments from single-celled organisms to learn more about the history of an area’s chemistry. But surprisingly little is known about how these organisms form their shells in the first place. In a bid to alleviate some uncertainty, scientists at the University of Washington have imaged some of the actions that take place. As a starting point, the researchers have zeroed in specifically on the time period during which single-celled organisms first start to form their shells. The researchers caught juvenile foraminifera by diving in deep water off Southern California. They then raised them in the lab, using tiny pipettes to feed them brine shrimp during their weeklong lives.Read More
Earlier this year, we covered a work in progress to build a new remotely operated vehicle (ROV) for Yellowstone Lake . It was just an idea back then, but the exploratory craft has since become a reality thanks to some determined researchers and a Kickstarter campaign that reached a goal of $100,000 in funding. Full cost for building the vessel was around $500,000, but crowdfunding a portion of it allowed officials at the Global Foundation for Ocean Exploration (GFOE), a nonprofit engineering group, to spur public interest. In a similar vein, they named the completed ROV “Yogi” in honor of the famous fictional comic book character devised by Hanna-Barbera who gets into trouble at Yellowstone National Park.Read More