5197000

Hach Dissolved Oxygen Probe

Hach Dissolved Oxygen Probe

Description

Hach dissolved oxygen probe is available with a 1m, 3m, or 15m cable.

Features

  • Clark-type polarographic sensor
  • Built-in thermistor provides automatic temperature compensation
  • 1 year warranty
Free Shipping on this product
Your Price
$670.00
Drop ships from manufacturer

Shipping Information
Return Policy
Why Buy From Fondriest?

Details

The Hach dissolved oxygen probe is a Clark-type amperometric sensor used to measure dissolved oxygen in aqueous solutions. It consists of an anode/cathode electrode system and potassium chloride-based electrolyte, separated from the sample by a replaceable oxygenpermeable Teflon membrane. A built-in thermistor provides automatic temperature compensation when using the sension6 Dissolved Oxygen Meter.
Notable Specifications:
  • Concentration Range: 0 - 20 mg/L or 0 - 200% saturation
  • Accuracy: +/-1.0% full scale
  • Temp Range: 0 - 50 C
  • Response Time: 99% of full value in 1 minute
  • Minimum Sample Flow: 20 cm/sec
  • Drift: Less than 1%/day
  • Length: 150 mm
  • Diameter: 12 mm
  • Cable Connector: 5-pin circular
What's Included:
  • (1)Hach dissolved oxygen probe with 5-Pin circular connector
  • (1) Spare membrane cap
  • (1) Bottle of filling solution, 50mL
  • (1) Probe storage bottle
Image Part # Product Description Price Stock Order
Hach Dissolved Oxygen Probe 5197000 Dissolved oxygen probe, 1m cable
$670.00
Drop ships from manufacturer
Hach Dissolved Oxygen Probe 5197003 Dissolved oxygen probe, 3m cable
$720.00
Drop ships from manufacturer
Hach Dissolved Oxygen Probe 5197015 Dissolved oxygen probe with weight assembly, 15m cable
$740.00
Drop ships from manufacturer
Image Part # Product Description Price Stock Order
Hach Electrolyte Filling Solution 2759126 Electrolyte filling solution, sensION+ dissolved oxygen probes, 50mL
$15.39
Drop ships from manufacturer
Additional Product Information:

Questions & Answers

| Ask a Question
Can my probe be stored dry?
The probe can only be left out of solution for 24 hours without damage.
How should I store my probe for long-term storage?
For long term storage, disconnect the probe from the meter and remove the membrane cap assembly. Rinse the anode, cathode, and membrane cap with deionized water. Shake the deionized water out of the membrane cap and use a clean lab wipe to blot the moisture from the electrode anode and cathode. Thread the membrane cap assembly loosely onto the body of the probe.

Related Products

In The News

Researchers Find Link Between Climate Change and Gastrointestinal Illnesses

An understanding of climate change’s effects on the environment has become commonplace and grows every day, but one researcher from Florida State University is looking to answer a new question: What are climate change’s effects on people’s health? In one of the first studies of its kind, Chris Uejio, an assistant professor at FSU, and a team of researchers studied how climate change can affect the roughly 20 million Americans (according to the Environmental Protection Agency) who consume untreated drinking water on a daily basis. Because climate forecasts are predicting higher rainfall rates over the next few decades, coming down in intense storms, Uejio said those flashes could cause flare-ups in waterborne illnesses.

Read More

Data Buoys Infographic

We put together this infographic on data buoys for our Spring 2017 edition of the Environmental Monitor ( PDF available online ). Organizations across the globe use data buoy systems to observe and monitor atmospheric and oceanographic conditions in remote locations. Measurements range from air pressure, humidity, wind speed and direction to wave height, water temperature, dissolved oxygen and other water quality parameters. With the help of national and international networks, reliable and comprehensive data sets are made available for research and public safety.

Read More

Spring 2017 Environmental Monitor Out Now

The Spring 2017 Environmental Monitor is on the way to subscribers this month. Our quarterly print editions feature the best of the Monitor's coverage from the past few months with added photos, graphics, updates and the latest monitoring gear. If you don't have a print subscription, you can sign up for free. If you'd like to peruse some of our past editions, check out our print archive . In this edition, we showcase a number of projects that are truly advancing the way data are gathered in the environmental monitoring field. This includes a look at the first-ever deployment of the ESPniagara in Lake Erie, a device for real-time microcystin measurements that is so advanced its makers say it is essentially a robot.

Read More