NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv

NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv
Free Shipping on this product
List Price
Your Price
Usually ships in 1-2 weeks

Shipping Information
Return Policy
Why Buy From Fondriest?


PP4500-01 PowerPod Pre-Cut for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv

PP4500 Series, PowerPods are a better option than bracket mounting. PowerPods provide a clean look of flush mounting with the advantage of a swivel base.

The trunion bracket that is supplied with marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.

PowerPods for Sail are great for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.

The Hi-Gloss Material
  • NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal
  • All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws
  • We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process
  • Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our Commitment to Quality
  • We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
Image Part # Product Description Price Stock Order
NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv PP4500-01 NAVPOD PP4500-01 POWERPOD PRE-CUT FOR GARMIN ECHOMAP
Usually ships in 1-2 weeks

NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv Reviews

| Write a Review

Be the first to write a review

In The News

Boise River Watershed Watch Shows Volunteers Issues River Faces

Having just wrapped up its ninth year, the Boise River Watershed Watch program is an increasingly popular citizen science program in Boise, Idaho. It takes interested volunteers and joins them with expert scientists from the U.S. Geological Survey (USGS) who teach them about the river’s health and sampling water quality using transparency tubes, dip nets and chemical test kits. “Our focus is to educate folks on the parameters that we measure, to give them an idea of the river’s health,” said Tim Merrick, public information officer at the USGS’ Idaho Water Science Center. “So they can collect data on the river’s conditions and get plugged in.

Read More

New Benthic Underwater Microscope Captures Coral Wars

Researchers from Scripps Institution of Oceanography at the University of California - San Diego have designed and built a diver-operated underwater microscope to study millimeter-scale processes as they naturally occur on the seafloor. The research team has observed coral turf wars, coral polyp “kissing” and much more using the new microscopic technology. Many important biological processes in the ocean take place at microscopic scales, but when scientists remove organisms from their native habitats to study them in the lab, much of the information and its context are lost. In a quest to overcome this challenge, Scripps oceanographers developed the new type of underwater microscope to image marine microorganisms in their natural settings without disturbing them.

Read More

First Environmental Monitoring System For Baltimore’s Inner Harbor

Baltimore’s Inner Harbor and the rivers that flow into it are important sources of water to Chesapeake Bay, popular recreation sites and the targets of an ambitious clean-up plan. But the city has for some time lacked an environmental monitoring system for tracking water quality in the harbor continuously. That is about to change, thanks to a collaboration between the U.S. Geological Survey (USGS) and Environmental Protection Agency (EPA). It will lead to the new installation of a suite of sensors that will provide the public and scientists with the first comprehensive, real time look at water quality in the harbor.

Read More