PP5065

NavPod PP5065 PowerPod Pre-Cut f/Garmin GPSMAP 8012/8212

NavPod PP5065 PowerPod Pre-Cut f/Garmin GPSMAP 8012/8212
Free Shipping on this product
List Price
$529.99
Your Price
$496.86
Usually ships in 1-2 weeks

Shipping Information
Return Policy
Why Buy From Fondriest?

Details

PP5065 PowerPod Pre-Cut for Garmin GPSMAP® 8012/8212

The PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.

The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.

PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.

The Hi-Gloss Material
  • NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal
  • All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws
  • We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process
  • Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product.

Our Commitment to Quality
  • We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
Image Part # Product Description Price Stock Order
NavPod PP5065 PowerPod Pre-Cut f/Garmin GPSMAP 8012/8212 PP5065 NAVPOD PP5065 POWERPOD PRE-CUT FOR GARMIN 8012/8212
$496.86
Usually ships in 1-2 weeks

In The News

Algae Bloom Spawns New Water Monitoring Program In Utah Lake

The result of a harmful algae bloom in the summer of 2016, the enhanced Utah Lake water quality monitoring program, reached its one year milestone in September. Located near the Provo and Orem metropolitan areas, the lake is Utah’s largest freshwater body and a popular water recreation and fishing spot. In the summer of 2016, recreation users reported an unusual amount of scum on the surface of the water. Utah Lake is monitored by the Utah Division of Water Quality (UDWQ). Prior to the 2016 harmful algae bloom (HAB), the UDWQ successfully used regular water sample testing and citizen reporting to stay on top of any incidents.

Read More

Data Buoys Study Turbid Water Environments in Lake Erie Basin

What started as a study into a relatively unexamined type of cyanobacteria has turned biologists from Bowling Green State University into an integral part of the effort to monitor and protect the drinking water in Sandusky, Ohio. Dr. George Bullerjahn, the Professor of Research Excellence at Bowling Green State University, has done considerable work in the study of beneficial cyanobacterial organisms in the eastern and central basins of Lake Erie. His current project is focused on the growth of the toxic cyanobacterium Planktothrix in Sandusky Bay. Over the course of his career Bullerjahn has collaborated with Dr. Steven Wilhelm from the University of Tennessee.

Read More

Bottom Composition Matters, Underwater Cameras Can Help

As a pro angler, I use my Lowrance electronics every single time I am on the water. They are great at locating fish and structure, but when combined with my FishSens SondeCAM HD Underwater Camera they can show everything. A camera is a great tool for someone who wants to better understand what they are seeing on their electronics and for me, it helps get a clear picture of one of the most important things in bass fishing: bottom composition. Hard Spots Hard bottoms are usually the best, and bass will relate to hard bottoms of different types depending on the region. My Lowrance StructureScan will show hard bottoms as bright, white areas on the screen where softer bottoms will be more grayish.

Read More