RMX4407

NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7

NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7
Free Shipping on this product
List Price
$459.99
Your Price
$431.24
In Stock

Shipping Information
Return Policy
Why Buy From Fondriest?

Details

RMX4407 RailMount Pre-Cut for Simrad NSS7/B&G Zeus T7

The RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

All RailMount NavPods Include:
  • Acrylic capped ABS plastic
  • Chromed stainless steel tamper-proof fasteners
  • Double Seal for watertight integrity
  • Models are available pre-cut for popular electronics.
  • Chromed stainless steel arm with swivel mount
  • Two sets of adaptors included for 1" or 1.25" diameter tubing



The Hi-Gloss Material
  • NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal
  • All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws
  • We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process
  • Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our Commitment to Quality
  • We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
Image Part # Product Description Price Stock Order
NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7 RMX4407 NAVPOD RMX4407 RAILMOUNT PRE-CUT FOR SIMRAD NSS7 B&G
$431.24
In Stock

In The News

Lake Superior Weather Buoy Provides Valuable New Data

A new weather buoy in a remote part of Lake Superior is providing much-needed weather data to local mariners, the National Weather Service and researchers. Scientists from the Superior Watershed Partnership (SWP), Lentic Environmental Services (LES) and the University of Colorado-Boulder recently deployed the buoy on the lake one mile north of Stannard Rock Lighthouse. SWP gained ownership of the lighthouse in 2015. Because the light was built on a large reef in a remote part of the lake, it is one of the most popular trout fishing and charter boat destinations on the Great Lakes. It has also been the location of a NOAA weather station since 1984 and a Great Lakes Evaporation Network monitoring site since 2008.

Read More

Nonprofit kick-starts water data gathering in Nepal Valley

For the first time, citizens of the Kathmandu Valley in Nepal have free access to local water data. The data is the result of a water quality monitoring pilot project started by the California-based nonprofit SmartPhones4Water (S4W). SmartPhones4Water, an idea developed by Ph.D. student Jeff Davids and the late Dr. Peter-Jules van Overloop from Delft University of Technology (Netherlands), was started in California in 2014. The goal of the organization is to leverage smartphone technology to gather water data in countries where such data is scarce. The method is simple: a network of local citizens use their smartphones to capture and upload the data to an online server and database.

Read More

Riverkeeper Initiative Tackles Water Monitoring, Activism and Education

Celebrating its 25th year, Coosa River Basin Initiative is forming a new water monitoring partnership with the Berry College Environmental Science program. Coosa River Basin Initiative, also known as CRBI , is a grassroots environmental protection organization that works with volunteers to protect and preserve the Coosa River in Rome, Georgia and the surrounding cities. CRBI is a member of the Georgia Water Coalition and the Waterkeeper Alliance. You may be wondering what is so special about the Coosa River. The answer is just about everything. The river is a vital part of the communities surrounding it. “Every river is important but the Coosa River is important in several unique ways,” said Jesse Demonbruen-Chapman, director of CRBI.

Read More