NavPod RMX4500-01 RailMount Pre-Cut f/Garmin echoMAP 7" Series

NavPod RMX4500-01 RailMount Pre-Cut f/Garmin echoMAP 7" Series
Free Shipping on this product
List Price
Your Price
Usually ships in 1-2 weeks

Shipping Information
Return Policy
Why Buy From Fondriest?


RMX4500-01 RailMount Pre-Cut for Garmin echoMAP™ 7" Series

Garmin echoMAP™ Models: 72SV 73SV 74SV 75SV 72DV 73DV 74DV 75DV

RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

The Hi-Gloss Material
  • NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal
  • All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws
  • We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process
  • Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our Commitment to Quality
  • We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
Image Part # Product Description Price Stock Order
NavPod RMX4500-01 RailMount Pre-Cut f/Garmin echoMAP 7" Series RMX4500-01 NAVPOD RMX4500-01 RAILMOUNT PRE-CUT FOR GARMIN ECHOMAP
Usually ships in 1-2 weeks

NavPod RMX4500-01 RailMount Pre-Cut f/Garmin echoMAP 7" Series Reviews

| Write a Review

Be the first to write a review

In The News

First Environmental Monitoring System For Baltimore’s Inner Harbor

Baltimore’s Inner Harbor and the rivers that flow into it are important sources of water to Chesapeake Bay, popular recreation sites and the targets of an ambitious clean-up plan. But the city has for some time lacked an environmental monitoring system for tracking water quality in the harbor continuously. That is about to change, thanks to a collaboration between the U.S. Geological Survey (USGS) and Environmental Protection Agency (EPA). It will lead to the new installation of a suite of sensors that will provide the public and scientists with the first comprehensive, real time look at water quality in the harbor.

Read More

Parasite Behind Yellowstone River Fish Kill Found In Other Rivers

A parasite that caused a massive fish kill in Montana’s Yellowstone River has been found in at least seven other rivers in the state, according to the Bozeman Daily Chronicle . Scientists with the Montana Fish, Wildlife and Parks department made the find. So far, the parasite has been confirmed in the upper and lower Madison, East Gallatin, Bighorn, Stillwater, and Boulder Rivers. It had already been confirmed in the Jefferson and Shields Rivers. The microscopic parasite causes proliferative kidney disease, one of the most serious diseases to impact whitefish and trout. The effect of the disease on Yellowstone’s fish populations is exacerbated by other stressors like near-record low flows, consistent high temperatures and the disturbance caused by recreational activities.

Read More

ESPniagara Tracks Algal Toxins In Lake Erie, Protects Drinking Water

It may have taken 20 years and $20 million to develop, but Lake Erie researchers working to fight harmful algal blooms (HABs) now have a new tool to safeguard drinking water: ESPniagara. The advanced sampler has been called a “lab in a can” for its ability to sample microcystins, the most common algal toxin these days, in almost real time. The big gadget’s name is a mashup between “ESP,” for environmental sample processor, and the name of Admiral Oliver Hazard Perry’s ship during the War of 1812. “We wanted to name it something that was significant to Lake Erie,” said Tim Davis, molecular biologist and lead HABs researcher at the National Oceanic and Atmospheric Administration’s Great Lakes Environmental Research Lab (NOAA GLERL) in Ann Arbor, Mich.

Read More