NexSens 3100-iSIC Cellular Data Logger | |
 | Description The NexSens 3100-iSIC data logger features an integrated cellular modem for real-time remote data collection from almost anywhere in the US.
Features Simultaneously supports 8 analog inputs & 4 digital inputs for multi-sensor data logging capability NEMA 4X enclosure and corrosion-resistant stainless steel hardware ensure superior data acquisition Includes long-life, internal 8.5 Ahr battery with AC and solar power options
|
Details: The NexSens iSIC (Intelligent Sensor Interface & Control) is the latest in data logging technology. Specifically designed for remote environmental monitoring applications, the iSIC offers superior data acquisition performance in extreme conditions. NexSens customers expect reliability, and the iSIC data logger delivers unmatched sensor interface and data collection with options for landline phone, cellular, radio, Ethernet, WI-FI, and satellite telemetry. Each iSIC data logger simultaneously supports 8 analog inputs & 4 digital inputs for multi-sensor data logging capability.
NexSens iChart Software is a Windows-based program for interfacing both locally (direct-connect) and remotely (through telemetry) to an iSIC data logger or network of data loggers. The iChart Setup Device Wizard includes built-in drivers and a step-by-step interface for setting up and configuring remote monitoring sensors and systems. When connected, the user can quickly configure sample & log intervals, upload data, or troubleshoot communications.
The iSIC data logger arrives ready for long-term deployment. All electronics are housed in a rugged, NEMA 4X enclosure constructed of heavy-duty fiberglass. The built-in 8.5 amp-hour sealed lead acid battery provides 12 volt power to the system, and the battery can be continuously charged using AC or solar power. Polymer-coated circuit boards, sealed connectors, corrosion-resistant stainless steel hardware, and built-in lightning protection ensure reliable performance in the harshest conditions. All sensors are cabled through Sealcon gland fittings to ensure protection from the elements. Notable Specifications: Analog Inputs: (4) differential or (8) single-ended, additional (4) differential or (8) single-ended optional, 0-2.5 V auto range, 12-bit resolution Analog Outputs: (2) 12-bit channels, 0-5 V or 0-2.5 V programmable Power Outputs: (1) 12V 100 mA configurable switch, (1) 5V 50 mA analog excitation voltage, (1) 12 V output, fused from battery Pulse Counters: (1) tipping bucket counter, max rate: 12 Hz Digital I/O Ports: (2) standard generic I/O ports SDI-12 Interface: (1) SDI-12 port (10 sensors), v1.3, can be configured as master or slave RS-232 Interface: (4) RS-232 ports, (2) additional optional RS-485 Interface: (1) RS-485 port, can be configured as master or slave NMEA 0183 Interface: (4) RS-232 ports, (2) additional optional Modbus RTU Interface: RS-232 or RS-485, can be configured as master or slave Internal Memory: 2MB Flash memory, over 500,000 data points minimum Power Requirements: Voltage: 10.7 to 16 VDC Typical Current Draw: 5 mA sleep, 10 mA processing, 36 mA analog measurement Battery: 12 V 8.5 A-Hr battery, internal Temperature Range: -20 to +60 C Dimensions: NEMA 4X Enclosure: 12 x 8.5 x 6.95 Compatible Sensors: 4-20 mA Sensors, Voltage Sensors, SDI-12 Sensors, RS-232 Sensors, RS-485 Sensors, Modbus RTU Sensors, NMEA 0183 Sensors, Thermistor Sensors, Tipping Bucket Rain Gauges, SensorBUS Sensors Cellular Modem Power Requirements: 200 mA receive/transmit, 40 mA idle, power management available Cellular Modem Frequency Range: Dual band: 800 MHz & 1.9 GHz Cellular Modem RF Protocol: GSM/GPRS/EDGE, CDMA, iDEN Supported Cellular Carriers: Cingular/AT&T, Verizon, Sprint/Nextel
What's Included: (1) iSIC data logger (1) NEMA 4x enclosure (1) MS2 connector for battery charging (1) MS8 connector for sensor connection (1) RF bulkhead for N-style RF cable connections (1) Grounding lug (1) Cellular modem (2) Gland fittings (1) 8.5 Ahr battery (5) Desiccant packs (1) RS-232 direct-connect cable (1) Cellular modem configuration cable (4) 56 Ohm resistors for 4-20mA sensor connection |
Air Quality
