Details:
With intuitive icons and scrolling menus, the SD900 Portable Samplers set up easily and in less than two minutes. The large color-coded keys and buttons accommodate gloved hands and the large, five-line, transflective LED backlit display stays readable in bright or subdued light. In addition, pump downtime and maintenance is held to a minimum while maximizing reliable results. The desiccant tube mounted on the side of the controller and the pump tubing is readily accessible and can be changed in minutes.
The Sigma SD900 Samplers use a strong pump draw and spring-loaded rollers to ensure that large particulates will not interfere with sample collection. The positive displacement peristaltic pump induces flow by squeezing a flexible 3/8 inch tube, while spring loaded rollers reduce pump tubing wear to prevent jams. The Sigma SD900 Samplers can be programmed for time-based, flow-based, composite and multiple bottle sampling set-ups. Up to three separate sampling programs can be stored simultaneously.
The Sigma SD900 Portable Sampler is ideal for NPDES storm water runoff monitoring, pretreatment compliance, CSO studies and monitoring, industrial wastewater discharge and WWTP process control. With a tough, molded ABS/PC exterior, the SD900 Portable Sampler controller is tightly sealed to withstand humidity and hostile, corrosive environments. The keypad, switches and display are covered by a waterproof, corrosion-resistant polyester membrane. The sealed connectors and pump shaft seal further ensure the units environmental integrity.
What's Included:
(1) SD900 Portable Sampler Controller
(1) Compact Insulated Base
(1) Battery, 6 AH Gel Electrolyte, 12 VDC, 3 pin
(1) 3 pin domestic smart charger
(1) 3 pin power supply
(1) 2.5 Gallon Polyethylene Bottle
(1) Retainer and Full Bottle Shut Off
(1) Vinyl Intake Tubing 25'
(1) Strainer, Teflon and Stainless Steel
Air Quality
