Vaisala PTB110 Barometers

Details:

The Vaisala BAROCAP Barometer PTB110 is designed both for accurate barometric pressure measurements at a room temperature and for general environmental pressure monitoring over a wide temperature range.

The sensor uses a silicon capacitive absolute pressure sensor that combines the outstanding elasticity characteristics and mechanical stability of single-crystal silicon with the proven capacitive detection principle. The excellent long-term stability of the barometer minimizes or even removes the need for field adjustment in many applications.

The PTB110 is suitable for a variety of applications, such as environmental pressure monitoring, data buoys, laser interferometers, and in agriculture and hydrology. The compact PTB110 is especially ideal for data logger applications as it has low power consumption. Also an external On/Off control is available. This is practical when the supply of electricity is limited.

Notable Specifications:

• Temperature range: -40 to 60 C
• Humidity range: non-condensing
• Linearity: +/-0.25 hPa
• Hysteresis: +/-0.03 hPa
• Repeatability: +/-0.03 hPa
• Calibration uncertainty: +/-0.15 hPa
• Accuracy at +20: +/-0.3 hPa
• Total accuracy at +15 to +25 C: +/-0.3 hPa
• Total accuracy at 0 to +40 C: +/-0.6 hPa
• Total accuracy at -20 to +45 C: +/-1.0 hPa
• Total accuracy at -40 to +60 C: +/-1.5 hPa
• Long-term stability: +/-0.1 hPa/year
• Supply voltage: 10 to 30 VDC
• Suppply voltage control: TTL level trigger
• Supply voltage sensitivity: negligible
• Current consumption: less than 4 mA
• Current consumption in shutdown mode: less than 1 A
• Output voltage: 0 to 2.5 VDC
• Output frequency: 500 to 1100 Hz
• Resolution: 0.1 hPa
• Load resistance: minimum 10 kohm
• Load capacitance: maximum 47 nF
• Settling time: 1 s to reach full accuracy after power-up
• Response time: 500 ms to reach full accuracy after a pressure step
• Acceleration sensitivity: negligible
• Pressure connector: M5 (10-32) internal thread
• Pressure fitting: barbed fitting for 1/8
• Minimum pressure limit: 0 hPa abs
• Maximum pressure limit: 2000 hPa abs
• Electrical connector: removable connector for 5 wires (AWG 28 ... 16)
• Terminals Pin 1: external triggering
• Terminals Pin 2: signal ground
• Terminals Pin 3: supply ground
• Terminals Pin 4: supply voltage
• Terminals Pin 5: signal output
• Housing material, plastic cover: ABS/PC blend
• Housing classification: IP32
• Metal mounting plate: Al
• Weight: 90 g
• Electromagnetic compatibility: Complies with EMC standard EN 61326-1, Generic Environment

Additional Product Information:

Vaisala PTB1101B0AB Specification Sheet

Vaisala PTB1101B0AB Manual