The ProMariner ProSport Heavy Duty Recreational Series On-Board Marine Battery Chargers provide automatic installation feedback with it's exclusive "System Check On" and individual "Battery Bank Trouble" LED Indicators.
ProSport Gen 3 On-Board Marine Battery Chargers incorporate all-digital microprocessor control. Like no other, the ProSport Series provides automatic installation feedback with its exclusive "System Check OK" and individual "Battery Bank Trouble" LED indicators, and also has the most advanced energy saving mode. After fully charging and conditioning batteries, ProSport's Energy Saver Mode will monitor and Auto Maintain batteries only when needed to maintain a full state of charge, resulting in maximum reserve power performance and lower AC power consumption and operating costs.
ProSport incorporates Distributed-On-Demand™ Charging technology, taking 100% of the available charging amps and distributing them to any one or combination of all batteries as needed for faster charging.
ProSport is 100% waterproof and shockproof, weighing 40% lighter than older technology epoxy filled chargers providing cooler operation and greater reliability. Each ProSport model has 4 digitally selectable charge profiles including a once-a-month storage reconditioning mode for extending battery life.
ProMar Digital Technology
Microprocessor and software controlled pulse charging technology delivering a 40% lighter design than the previous generation of epoxy filled chargers, cooler charger operation and faster charging.
System OK & Battery Bank Trouble Status Indicators
Advanced technology eliminates time consuming troubleshooting by clearly indicating system and battery connections are OK or if a fault is present on a specific battery bank.
Digital Multi-Stage Performance Charging
Fully charge and extend the life of your batteries. Automatically charges, conditions and safely maintains all batteries on board for maximum time on the water.
Storage Recondition Mode
During short or long-term storage, ProSport automatically reconditions all
batteries on board once a month for maximum battery life and performance.
Automatically charges and maintains your engine crank battery while
distributing all remaining charging amps to trolling motor or house batterie(s).
Digital LED Display and Battery Type Selector
LED indicators for charging, conditioning and maintain modes in addition to AC power and selected battery type (2 charge profiles to choose from with a 3rd high performance. AGM HP profile on the ProSport20 Dual only.).
Built-in Quality & Safety
Compact and rugged extruded aluminum design, dual in-line DC safety fuses for trolling motor and house battery banks. Built-in over-voltage, overload, over-temperature, reverse polarity and ignition protection.
|Image||Part #||Product Description||Price||Stock||Order|
|43023||ProSport Heavy Duty Recreational Series On-Board Marine Battery Charger, 6 Amp, 1 Bank||
|Usually ships in 1-2 weeks|
|43026||ProSport Heavy Duty Recreational Series On-Board Marine Battery Charger, 12 Amp, 2 Bank||
Usually ships in 1-2 weeks
|43028||ProSport Heavy Duty Recreational Series On-Board Marine Battery Charger, 20 Amp, 2 Bank||
|43029||ProSport Heavy Duty Recreational Series On-Board Marine Battery Charger, 20 Amp, 3 Bank||
Usually ships in 1-2 weeks
While the scientific community has formed its consensus on how ice sheets are shrinking in and around Greenland, some researchers are tracking what happens to the meltwater as it drains into the ocean each summer. Their study, published in Nature Geoscience by an interdisciplinary team of biologists, oceanographers and hydrologists, used computer models to simulate the meltwater to see where currents take it and what effect it could have on the ocean. Renato Castelao, one of the researchers and an associate professor of marine science for the University of Georgia, said one of the biggest discoveries of the study was the surprising final destinations of the ice sheets as they melt into the ocean each summer.Read More
Thinking of hitting the ice with a SondeCAM underwater fishing camera? Due to its rugged design, you won't have to worry about it handling the harsh elements. However there are a few simple tricks to get the most out of a FishSens SondeCAM while ice fishing. You won't have to do anything to modify the SondeCAM itself, but you are going to have to bring a few extra things. Most importantly we are going to need a power source. Unless you are hauling your gear with a truck, you'll want something more portable than the battery you used in the boat. Pick up an inexpensive and maintenance-free 12-volt, 9-amp battery. It is going to provide plenty of power, but will be much lighter and take up less space.Read More
We've all felt the frustration of weeding through a school of dinks to catch a "keeper." Often the small fish outnumber the bigger ones and they are typically more aggressive. Sometimes there's no choice but to deal with it, as is often the case with open water fishing. However a frozen lake involves a vertical presentation and a stable platform, it's a perfect situation to pick and choose which fish you want. Once you locate a school and get set up it's time to start sizing them up with a FishSens SondeCAM underwater fishing camera. It can be mind-blowing just how big some of these schools of fish are and also how outnumbered fish of a desirable size can be.Read More