SL-70-Y

Sealite SL-70 2-3NM+ Solar Marine Light

Sealite SL-70 2-3NM+ Solar Marine Light

Description

The Sealite SL-70 solar marine light features a 3 nautical mile visible range.

Features

  • Reliable year-round operation in low sunlight conditions
  • 256 IALA flash patterns, user-adjustable without the need for external devices
  • NiMH battery for long service life & wide temperature range
Free Shipping on this product
Your Price
$649.00
Usually ships in 3-5 days

Shipping Information
Return Policy
Why Buy From Fondriest?

Details

Made from tough, durable polycarbonate and using the latest high intensity LED's, the SL-70 lantern boasts dual high-performance solar modules incorporated into Sealite's world-first Solar Collection Lens. These solar modules are angled to obtain maximum sunlight capture, allowing the unit to operate reliably in a range of low sunlight environments.

The SL-70 can be installed in minutes, and requires no operator intervention. The flash-characters are easily adjusted on-site by the user, and the lantern has a permanent ON/OFF switch for easy storage.

The sealed battery compartment allows the battery to be replaced after years of service – don’t throw the light away at the end of the battery service life.

Sealite's SL-70 solar marine light has been awarded the prestigious Australian DesignMark® at the Australian Design Awards; a testament of Sealite's commitment to the ongoing development of state-of-the-art products.

Notable Specifications:

Light Characteristics

  • Light Source: 6 ultra-high intensity LEDs
  • Available Flash Colors: Red, Green, White, Yellow, Blue
  • Maximum Available Intensity: R- 11.4cd, G- 20.0cd, W- 26.0cd, Y- 10.0cd
  • Visible Range: 2-3nm+
  • Horizontal Output: 360 degrees
  • Vertical Divergence: 9 degrees
  • Reflector Type: Omnidirectional 360° LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918)
  • Available Flash Characteristics: Up to 256 IALA recommended (user adjustable)
  • Intensity Adjustments: Adjustable in 25% increments
  • LED Life Expectancy: >100,000 hours

Electrical Characteristics

  • Current Draw: Refer to Sealite Power Calculator
  • Circuit Protection: Integrated
  • Nominal Voltage: 3.6v
  • Autonomy: >30 days (14 hour darkness, 12.5% duty cycle)
  • Temperature Range: -40 to 80°C

Solar Characteristics

  • Solar Module Type: Multicrystalline
  • Output: 2.5watt (2x 1.25watt)
  • Solar Module Efficiency: 14%
  • Charging Regulation: Microprocessor controlled

Power Supply

  • Battery Type: High grade NiMH - Environment friendly
  • Battery Capacity: 8Ah
  • Nominal Voltage: 3.6v
  • Battery Service Life: Average 5 years

Physical Characteristics- Lights

  • Body Material: LEXAN® Polycarbonate - UV-stabilised
  • Lens Material: LEXAN® Polycarbonate - UV-stabilised
  • Lens Diameter (mm/inches): 150 / 5 7/8
  • Lens Design: External optics with interior flute design
  • Mounting: 200mm OD base pattern
  • Height (mm/inches): 240 / 9 1/2
  • Width (mm/inches): 231 / 9 1/8
  • Mass (Kg/lbs): 1.4 / 3 1/8

Certifications

  • CE EN61000-6-3:1997, EN61000-6-1:1997
  • Quality Assurance ISO9001:2008
  • Waterproof IP68

Intellectual Property

  • Patents US Pat. No. 6,667,582. AU Pat. No. 778,918
  • Trademarks SEALITE® is a registered trademark of Sealite Pty Ltd

Warranty

  • Full three years
Image Part # Product Description Price Stock Order
Sealite SL-70 2-3NM+ Solar Marine Light SL-70-Y Solar marine light, 2-3 nautical mile range, yellow
$649.00
Usually ships in 3-5 days
Sealite SL-70 2-3NM+ Solar Marine Light SL-70-R Solar marine light, 2-3 nautical mile range, red
$649.00
Usually ships in 3-5 days
Sealite SL-70 2-3NM+ Solar Marine Light SL-70-G Solar marine light, 2-3 nautical mile range, green
$649.00
Usually ships in 3-5 days
Sealite SL-70 2-3NM+ Solar Marine Light SL-70-W Solar marine light, 2-3 nautical mile range, white
$649.00
Usually ships in 3-5 days
Image Part # Product Description Price Stock Order
Sealite SL-70 Replacement Battery SL-70-BAT Replacement battery for SL-70 solar marine light
$104.00
Usually ships in 3-5 days

In The News

Algae Bloom Spawns New Water Monitoring Program In Utah Lake

The result of a harmful algae bloom in the summer of 2016, the enhanced Utah Lake water quality monitoring program, reached its one year milestone in September. Located near the Provo and Orem metropolitan areas, the lake is Utah’s largest freshwater body and a popular water recreation and fishing spot. In the summer of 2016, recreation users reported an unusual amount of scum on the surface of the water. Utah Lake is monitored by the Utah Division of Water Quality (UDWQ). Prior to the 2016 harmful algae bloom (HAB), the UDWQ successfully used regular water sample testing and citizen reporting to stay on top of any incidents.

Read More

Data Buoys Study Turbid Water Environments in Lake Erie Basin

What started as a study into a relatively unexamined type of cyanobacteria has turned biologists from Bowling Green State University into an integral part of the effort to monitor and protect the drinking water in Sandusky, Ohio. Dr. George Bullerjahn, the Professor of Research Excellence at Bowling Green State University, has done considerable work in the study of beneficial cyanobacterial organisms in the eastern and central basins of Lake Erie. His current project is focused on the growth of the toxic cyanobacterium Planktothrix in Sandusky Bay. Over the course of his career Bullerjahn has collaborated with Dr. Steven Wilhelm from the University of Tennessee.

Read More

Bottom Composition Matters, Underwater Cameras Can Help

As a pro angler, I use my Lowrance electronics every single time I am on the water. They are great at locating fish and structure, but when combined with my FishSens SondeCAM HD Underwater Camera they can show everything. A camera is a great tool for someone who wants to better understand what they are seeing on their electronics and for me, it helps get a clear picture of one of the most important things in bass fishing: bottom composition. Hard Spots Hard bottoms are usually the best, and bass will relate to hard bottoms of different types depending on the region. My Lowrance StructureScan will show hard bottoms as bright, white areas on the screen where softer bottoms will be more grayish.

Read More