NexSens

Heated Vaisala WXT510 weather sensor, NexSens weatherVIC software, 100 ft. PC cable, & 12 V power supply

Vaisala WXT510 weather sensor, NexSens weatherVIC software, 100 ft. PC cable, & 12 V power supply.

The AVSS stainless steel enclosure is ideal for iSIC data loggers installed in harsh environments or vandal prone areas.

The SC959A-8R0 ultrasonic water level sensor mounts above the water and measures the time of travel for a sound wave to reflect and return to the sensor.

The 30-watt Solar Power Kits are ideal for high power remote applications or extreme northern climates.

Extended Range Kit includes (6) DS1922T loggers, (1) micro-T software CD, (1) USB reader.

The 20-watt Solar Power Kit offers adequate power for most data logging applications.

Designed to withstand the harshest environment, this sonar unit is a great choice for buoy applications requiring depth readings.

Temp & RH Kit includes (4) DS1923 loggers, (12) adhesive pads, (1) micro-T software CD, (1) USB reader.

Limnology Kit includes (4) DS1921G loggers, (4) underwater housings, (1) micro-T software CD, (1) USB reader.

High Accuracy Kit includes (4) DS1922L loggers, (1) micro-T software CD, (1) USB reader.

Consider the A21 10-watt Solar Power Kit for low-power data logging applications.

For excellent holding power, cast iron or steel mooring anchors such as these pyramids are far superior to granite or concrete blocks.

NexSens RS-232 cable for direct connection between a computer and iSIC data logger.

The ISE WQSensors are Ion Selective Electrodes (ISE), an industry standard method that has been proven to provide accurate data measurements.

The ISE WQSensors are Ion Selective Electrodes (ISE), an industry standard method that has been proven to provide accurate data measurements.

The ISE WQSensors are Ion Selective Electrodes (ISE), an industry standard method that has been proven to provide accurate data measurements.

The ISE WQSensors are Ion Selective Electrodes (ISE), an industry standard method that has been proven to provide accurate data measurements.

The ISE WQSensors are Ion Selective Electrodes (ISE), an industry standard method that has been proven to provide accurate data measurements.

The ISE WQSensors are Ion Selective Electrodes (ISE), an industry standard method that has been proven to provide accurate data measurements.

The NexSens A41 Omni-directional Antenna is an excellent choice for remote communication via spread spectrum radio at distances beyond 1 mile.

NexSens RS-232 cable for direct connection between a computer and iSIC data logger.

NexSens weatherVIC software is a powerful data collection and analysis tool for the Vaisala WXT510 multi-parameter weather transmitter, turning your PC into a data logger.

For excellent holding power, cast iron or steel mooring anchors such as these pyramids are far superior to granite or concrete blocks.

Based on the US EPA approved method (360.1), the WQ-DO sensor is designed for laboratory accuracy. Probe maintenance is minimal and simple with screw-on cap membranes.

Starter Kit includes (6) DS1921G loggers, (1) micro-T software CD, (1) USB reader.

Ensure high communication quality of your NexSens 3100-iSIC cellular modem and 4100-iSIC spread spectrum radios.

Constructed with impact-resistant polycarbonate, gel electrolyte, double junction, and full range glass, the WQ-ORP sensor is ready for thousands of measurements.

This Optima battery is ideal for high-power shore-based and buoy-based monitoring systems.

Constructed with impact-resistant polycarbonate, gel electrolyte, double junction, and full pH range glass, the WQ-pH sensor is ready for thousands of measurements.

The NexSens A50-S features an MS-8 connector assembly for plug-and-play connection to YSI 6-series water quality sondes.

The A14 float charger provides optimized charging for A03 26 A-Hr SLA (sealed lead acid) batteries. The output is controlled to prevent over charging.

Make multiple external connections to the NexSens iSIC data logger with the A50 Junction Box.

micro-T software is a user-friendly software package that simplifies the task of deploying micro-T temperature loggers and managing their data.

Ensure high communication quality of your NexSens 3100-iSIC cellular modem and 4100-iSIC spread spectrum radios.

NexSens RS-232 cable for direct connection between a computer and iSIC data logger.

For excellent holding power, cast iron or steel mooring anchors such as these pyramids are far superior to granite or concrete blocks.

The NexSens A46 Yagi Radio Antenna is an excellent choice for use in situations where communication signals must travel extended distances or are impeded by tree cover.

Deployment pipe assembly, 4". Perforated 4" schedule 80 PVC pipe, 4" schedule 80 PVC male threaded adapter, stainless steel stop bolt and nuts, 24" total length

The A11 float charger provides optimized charging for A01 8.5 A-Hr SLA (sealed lead acid) batteries. The output is controlled to prevent over charging.

The A39 lightning arrestor has been designed specifically to protect radio and cellular equipment from static electricity and lightning surges on RF cables and antennas.

The NexSens A44 High Gain Radio Radome Antenna is an excellent choice for remote communication via spread spectrum radio at distances less than 1 mile.

The NexSens A49 High Gain Cellular Radome Antenna is an excellent choice for remote communication via CDMA, iDEN, EDGE or GSM/GPRS cellular transmission.

The A82 is required to log weather data from your WXT510 weather transmitter to your PC. Comes standard with weatherPACK system.

The BR12 Bromide ISE Module is included with the purchase of a WQ-BR Sensor.

The NO12 Nitrate ISE Module is included with the purchase of a WQ-NO3 Sensor.

The NH12 Ammonium ISE Module is included with the purchase of a WQ-NH4 Sensor.

The CA12 Calcium ISE Module is included with the purchase of a WQ-CA Sensor.

The CL12 Chloride ISE Module is included with the purchase of a WQ-CL Sensor.

The FL12 Fluoride ISE Module is included with the purchase of a WQ-FL Sensor.

Constructed of chemically resistant stainless steel and Santoprene elastomer, the WQ-TEMP offers precision measurements over a broad temperature range.

NexSens RS-232 cable for direct connection between a computer and iSIC data logger.

Stainless steel jaw-to-jaw swivels securely connect mooring chain to both the data buoy and pyramid anchors.

Ensure high communication quality of your NexSens 3100-iSIC cellular modem and 4100-iSIC spread spectrum radios.

NexSens RS-232 cable for direct connection between a computer and iSIC data logger.

Using the A59 Interface cable, the NexSens iSIC data logger can trigger an ISCO sampler to take a sample or run sampling programs based on logged parameters.

When your application includes additional sensors or other high-power requirements, a 26 A-Hr SLA (sealed lead-acid) battery is a smart choice.

Deployment pipe assembly, 2". Perforated 2" schedule 80 PVC pipe, 2" schedule 80 PVC male threaded adapter, stainless steel stop bolt and nuts, 24" total length

Ensure high communication quality of your NexSens 3100-iSIC cellular modem and 4100-iSIC spread spectrum radios.

The A56 Unistrut Mounting Kit includes the equipment you need to mount the AVSS241608 enclosure.

The micro-T DS1923 measures temperature from -20 to 85 C and relative humidity from 0 to 100%.

The NexSens MAST is a 2" threaded aluminum pole designed for mounting an iSIC data logger, solar panel, and antenna for quick deployment.

MS2 to flying lead external power cable, 15'

Stainless steel jaw-to-jaw swivels securely connect mooring chain to both the data buoy and pyramid anchors.

NexSens Pole/Wall Mounting Kits are used for easy attachment of any iSIC data logger to 2" pipe, walls, or other mounting structures.

The M-ARM-E mounting arm is used to mount Vaisala and RM Young meteorological sensors to deployment poles.

For excellent holding power, cast iron or steel mooring anchors such as these pyramids are far superior to granite or concrete blocks.

The micro-T DS1922T will store up to 4096 temperature readings with +/- 0.5 C accuracy, 0.0625 C resolution, and a range of 0 to 125 C.

The M-ARM mounting arm is used to mount LI-COR LI-200 Solar Radiations sensors and LI-190 PAR sensors to deployment poles.

The TS-ADP PC Adapter Cable is required to log multi-point temperature data from your TS110 Temp String to your PC.

Locking well cap with pin, 4"

Protect your sensitive landline phone modem communication equipment with the A76 Telephone Surge & Lightning Protector.

The WXT510-M is a PVC mounting device for the Vaisala WXT510 weather transmitter and WMT50 ultrasonic wind sensor.

The WQ-A Sensor Arm is hands-free and self-holding, with arm slots for up to five WQSensors.

Stainless steel jaw-to-jaw swivels securely connect mooring chain to both the data buoy and pyramid anchors.

The deep outlet cover is weatherproof and is used with the (A11) 800 mA battery charger in outdoor AC operated systems.

Ground rod, clamp, and wire for earth-grounding of the iSIC data loggers and gas discharge lightning protection devices.

Ensure high communication quality of your NexSens 3100-iSIC cellular modem and 4100-iSIC spread spectrum radios.

Ensure high communication quality of your NexSens 3100-iSIC cellular modem and 4100-iSIC spread spectrum radios.

The micro-T DS1922L will store up to 4096 temperature readings with +/- 0.5 C accuracy, 0.0625 C resolution, and a range of -40 to 85 C.

Pipe-mount clamp, rod/wire clamp, and wire for grounding of the iSIC data loggers and gas discharge lightning protection devices to existing grounded structures.

The A10 is required to log weather data from your WXT510 weather transmitter to your PC. Comes standard with weatherPACK system.

Ensure high communication quality of your NexSens 3100-iSIC cellular modem and 4100-iSIC spread spectrum radios.

Ammonium standard solution, 500mL, 1000ppm

Bromide standard solution, 500mL, 1000ppm

Calcium standard solution, 500mL, 1000ppm

Chloride standard solution, 500mL, 1000ppm

Fluoride standard solution, 500mL, 1000ppm

Nitrate standard solution, 500mL, 1000ppm

Locking well cap with pin, 2"

The NexSens A45 Whip Antenna is ideal for radio telemetry applications where only a short distance is required to transmit data.

Stainless steel bow shackles securely connect mooring chain to both the data buoy and pyramid anchors.

Stainless steel jaw-to-jaw swivels securely connect mooring chain to both the data buoy and pyramid anchors.

The cap membrane kit for the NexSens WQ-DO sensor is easy to use, providing the user with minimal and simple probe maintenance.

Threaded female adapter, 4", schedule 80 PVC

A standard power source for the NexSens iSIC data logger, these high capacity, SLA (sealed lead-acid) batteries fit securely in the data logger and offer adequate power for most field applications.

Underwater housings are the perfect micro-T logger deployment option for harsh weather environments and submersible studies.

The A12 Power Adapter is required to log multi-point temperature data from your TS110 Temp String to your PC.

A pack of A75 gland fittings are included with each iSIC data logger and are designed to create a watertight fit when running sensor cables into the iSIC box.

The DS1402 USB reader provides a direct PC interface for micro-T loggers. This allows the user to configure, deploy, view status, and upload data when used with micro-T Software.

Threaded male adapter, 4", schedule 80 PVC

The D9097U RS232 adapter provides a direct PC interface for OEM temperature strings.

Stainless steel bow shackles securely connect mooring chain to both the data buoy and pyramid anchors.

The micro-T DS1921G will store up to 2048 temperature readings with +/- 1 C accuracy, 0.5 C resolution, and a range of -40 to 85 C.

The micro-T DS1921Z will store up to 2048 temperature readings with +/- 1 C accuracy, 0.125 C resolution, and a range of -5 to 26 C.

Ammonium reference filling solution, 125mL

Ammonium ISA, 125mL

Bromide reference filling solution, 125mL

Bromide ISA, 125mL

Calcium reference filling solution, 125mL

Calcium ISA, 125mL

Fluoride reference filling solution, 125mL

Chloride reference filling solution, 125mL

Nitrate reference filling solution, 125mL

Chloride ISA, 125mL

Fluoride ISA, 125mL

Nitrate ISA, 125mL

The micro-T DS1921H will store up to 2048 temperature readings with +/- 1 C accuracy, 0.125 C resolution, and a range of 15 to 46 C.

The WQ-STIR Micro-Stirrer is designed to work with stir plates and works with any WQSensor probe.