Thermo Orion Chlorine Electrode
Features
- Solid state combination
- No reference filling solution required
- Measurement range: 1 x 10-7 to 3 x 10-4 M 0.01 to 20 ppm
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The Thermo Orion Chlorine Electrode allows total residual chlorine to be measured quickly and accurately. All forms of total residual chlorine are measured: free chlorine, hypochlorites, and chlorine bound to nitrogenous compounds.
Sampling
This electrode method is EPA approved for drinking water and wastewater (EPA No. 330.5). The method permits rapid analyses to be done at the sampling site, eliminating erroneous low readings due to Cl2 loss.
*Samples not measured immediately are subject to chlorine loss due to reaction with oxidizable species in the sample
- Construction: Solid state combination
- Measurement Range: 3 x 10(-4) to 10(-7) M / 20 to 0.01 ppm
- Temp Range: 0 to 50 C
- Required Reference Electrode: Included
- Reference Filling Solution: None Required
- Calibration Standards: 100 ppm as Cl2 (977007)
- Required ISA: Iodide reagent (977010) / Acid reagent (977011)
Select Options
In The News
Data-Driven Decisions: Tracking Sediment during the Klamath Dam Removal
The largest dam removal in U.S. history, the deconstruction of the Klamath Dam is slated to begin this summer. The project includes four dams along the Klamath River with the first and smallest dam, Copco #2, scheduled for removal first. As each of the dams are torn down, scientists and consultants will keep a close eye on the state of the Klamath River downstream to assess the impact of undamming the river. Shawn Hinz, managing partner and environmental toxicologist with Gravity Consulting , has been involved with the Klamath Dam project for over a decade. Hinz was a part of these earlier steps, representing the academic stakeholder position as a graduate student sitting on a board of other stakeholders.
Read More
From the Tap: Source Water Monitoring for Public Health
In regions with historically secure access to clean drinking water, few think about the work that goes into ensuring that the water they fill their cups with is safe. In reality, millions of dollars are invested in the infrastructure, equipment and teams involved in converting source water into drinking water. While all the work that goes into providing clean water often goes unnoticed, analysts like Michele Gilkerson, a water research analyst with the City of Columbus Division of Water, know exactly how much goes into securing safe water for millions of people. Gilkerson started with Battelle Memorial Institute in 1991 in their water ecology section. There, she saw how interesting source water monitoring could be, even though it isn’t often spotlighted in the environmental sector.
Read More
Choosing the Right Water Quality Monitoring Systems Is Crucial for Stantec Inc.
Data is king when it comes to water quality monitoring. It is not merely the type of data being collected that matters but also how that data is stored, processed and presented. When Joseph Kamalesh, a project manager with Stantec Consulting Services Inc. , needs to find the right equipment for large client-based projects, he knows to keep these factors in mind. Joseph has a background in water quality and water flow monitoring instrumentation, which he continues to focus on at Stantec. During college and his early career, Joseph gained experience with water instrumentation, consisting primarily of on-site wastewater sampling and sampling small systems.
Read More
