YSI 5905 BOD Probe

The YSI Model 5905 BOD (Biochemical Oxygen Demand) probe is used for measuring dissolved oxygen in all popular-sized BOD bottles.

Features

  • Compatible with many YSI DO meters, including Models 52 & 58
  • Uses "fool-proof", screw-on cap membranes
  • Refurbishable electrode system
List Price $925.75
Your Price $879.46
Stock Check Availability  

Overview
The YSI 5905 BOD (Biochemical Oxygen Demand) probe is used for measuring dissolved oxygen in all popular-sized BOD bottles. The YSI 5905 probe is designed for use with YSI Models 52 and 58, and for Models 5000 and 5100 when used with the 5011 adapter. The 5905 BOD probe comes with a power supply cord and a 5906 cap membrane kit.

Mechanics
YSI 5905 BOD Probe is a voltammetric (polarographic) sensor of dissolved oxygen intended for laboratory use. Membranes should be replaced every 1 to 2 weeks to ensure accurate readings.

Benefits

  • Self-stirring,
  • Easily replaced membrane cap,
  • Refurbishable electrode system.
  • (1) Self-stirring BOD probe
  • (1) Power supply
  • (1) 5906 cap membrane kit
  • (1) Operations manual
Questions & Answers
I turned on the YSI 5100 meter which has a YSI 5905 probe attached. The reading came up all zeros. Turned off and on a few times, wiggled the cord and it corrected itself. What could be the cause?
It sounds like there is a short in the cable that is causing a communication issue between the probe and the meter. We can evaluate the probe at no cost to verify the failure. Click the Support link above for instructions on returning the probe for evaluation.
How is the probe powered?
The 5905 probe is powered by an attached DO meter. However, the stir paddle must be plugged into its power adaptor to operate, as it is not powered by the meter.
What meters is this BOD probe compatible with?
The 5905 BOD probe is compatible with four YSI dissolved oxygen meters: Models 52, 58, 5000 and 5100 . If used with benchtop models 5000 or 5100, the YSI 5011 adaptor is required.
Did you find what you were looking for?

Select Options

  Products 0 Item Selected
Image
Part #
Description
Price
Stock
Quantity
YSI 5905 BOD Probe
059800
5905 BOD probe, self-stirring, 5' cable
Your Price $879.46
Check Availability  
  Accessories 0 Item Selected
Notice: At least 1 product is not available to purchase online
×
Multiple Products

have been added to your cart

There are items in your cart.

Cart Subtotal: $xxx.xx

Go to Checkout

In The News

Combating Water Insecurity in Saskatchewan with Real-Time Data

The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.

Read More

Seametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring

The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent.  Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips.  The logger accurately records temperature and turbidity up to a depth of 50 meters.

Read More

Collecting Data at the Top of the World: How Scientists Retrieve Glacial Ice Cores

A helicopter touches down in the small town of Sicuani, Peru, at an elevation of 11,644 feet. Earlier that day, a boxcar brought fuel, drills, food, and other equipment for a glacial expedition. The year is 1979, and glaciologist Lonnie Thompson is preparing to lead a team to the Quelccaya ice cap in hopes of becoming the first scientists to drill an ice core sample from this glacier. The only problem? The glacier is located at 19,000 feet in one of the most remote areas of the world. The helicopter takes off from the town, but the thin atmosphere at that elevation does not allow it to safely touch down on the ice– due to the aircraft’s weight, and it becomes unstable when the air is less dense.

Read More