Extech 480846 Electromagnetic Field Strength Tester
The Extech Electromagnetic Field Strength Tester is used to monitor high frequency electromagnetic radiation.
Features
- Measurement optimized for 900MHz, 1800MHz, 2.7GHz, 3.5GHz and 8GHz
- Max hold and average functions
- Manual store/recall up to 99 sets
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
The Extech Electromagnetic Field Strength Tester monitors high frequency radiation in the 10MHz to 8GHz frequency range. The meter features a non-directional (isotropic) measurement with three-channel (triaxial) measurement probe. If the level exceeds a limit, an audible alarm will sound.
Applications include RF electromagnetic wave field strength measurements, mobile phone base station antenna radiation power density measurement, radiation safety level tests, locating RF "hot spots" in the workplace or at home, microwave oven leakage tests, RF "eletrosmog" detection, and wireless network detection.
- Sensor type: electric field
- Frequency range: 10MHz to 8GHz (optimized for 900MHz, 1800MHz, 2.7GHz, 3.5GHz and 8GHz)
- Units of measure: mV/m, V/m, µA/m, mA/m, µW/m², mW/m², W/m², µW/cm², mW/cm²
- Measuring ranges: 20mV/m to 108.0V/m, 53µA/m to 286.4mA/m, 1µW/m² to 30.93W/m², 0µW/cm² to 3.093W/cm²
- Resolution: 0.1mV/m, 0.1µA/m, 0.1µW/m², 0.001µW/cm²
- Audible alarm: adjustable threshold with on/off
- Memory: manual store/recall of 99 sets
- Dimensions: 2.6 x 2.49 x 9.7" (67 x 60 x 147mm)
- Weight: 8.8oz (250g)
- (1) 8 GHz electromagnetic field strength tester
- (1) 9 V battery
- (1) Carrying case
Select Options
In The News
Combating Water Insecurity in Saskatchewan with Real-Time Data
The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.
Read More
Seametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring
The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent. Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips. The logger accurately records temperature and turbidity up to a depth of 50 meters.
Read More
Collecting Data at the Top of the World: How Scientists Retrieve Glacial Ice Cores
A helicopter touches down in the small town of Sicuani, Peru, at an elevation of 11,644 feet. Earlier that day, a boxcar brought fuel, drills, food, and other equipment for a glacial expedition. The year is 1979, and glaciologist Lonnie Thompson is preparing to lead a team to the Quelccaya ice cap in hopes of becoming the first scientists to drill an ice core sample from this glacier. The only problem? The glacier is located at 19,000 feet in one of the most remote areas of the world. The helicopter takes off from the town, but the thin atmosphere at that elevation does not allow it to safely touch down on the ice– due to the aircraft’s weight, and it becomes unstable when the air is less dense.
Read More
