Extech RHT10 Humidity & Temp USB Datalogger
Features
- Selectable data sampling rate: 2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr
- Status indication via red/yellow LED and green LED
- Long battery life (approx. 1 year)
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The Extech Humidity and Temperature USB Datalogger is a compact unit that logs 32,000 readings, 16,000 for temperature and 16,000 for humidity, at user-programmable sampling rates.
Mechanics
The selectable data sampling rates are 2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, and 24hr. The datalogger also has a user-programmable threshold for relative humidity and temperature alarm if the reading exceeds set data points. The LED will indicate the status of the reading with red/yellow LED and green LED. The USB datalogger has a long battery life of approximately 1 year.
- Temperature range: -40 to 158°F (-40 to 70°C)
- Temperatuer resolution: 0.1°F/°C
- Temperature accuracy: ±1.0°F (-4 to 122°F), ±1.8°F (all other ranges), ±0.5°C (-20 to 50°C), ±1.0°C (all other ranges)
- Humidity range: 0 to 100%RH
- Humidity resolution: 0.1%RH
- Humidity accuracy: ±3%RH
- Datalogging interval: 2 seconds to 24 hours
- Memory: temperature: 16,000 points; relative humidity: 16,000 points
- Dimensions: 5.1 x 1.1 x 0.98" (130 x 30 x 25mm)
- Weight: 1oz (20g)
- (1) Datalogger
- (1) Windows compatible software
- (1) 3.6 V battery
Select Options
In The News
Great Lakes Research Center: Designing Targeted Monitoring Solutions
According to the National Oceanic and Atmospheric Administration ( NOAA ), the Great Lakes have more miles of coastline than the contiguous Atlantic and Pacific coasts combined and contain 20 percent of the world's freshwater, making it a critical region to protect and conserve. Continuous monitoring and data-informed resource management are key components of managing waters in the region. Hayden Henderson, a research engineer with the Great Lakes Research Center (GLRC), designs and deploys monitoring platforms throughout the Great Lakes. With a background in environmental engineering, Henderson enjoyed the challenge of creating systems and making them work to obtain difficult, remote measurements.
Read More
Monitoring Meadowbrook Creek: Real-Time Data Collection in an Urban Creek
Meadowbrook Creek in Syracuse, New York, has been monitored by Syracuse University (SU) faculty and students for over a decade. Originally established by Dr. Laura Lautz in 2012, the early years of the program focused on collecting grab water samples for laboratory analysis and evaluating the impact of urban land use, human activities, and natural processes on water resources. Tao Wen , an Assistant Professor in SU’s Department of Earth and Environmental Sciences, took over the program in 2020 and upgraded the existing systems to include 4G modems that allowed for real-time data viewing. [caption id="attachment_39339" align="alignnone" width="940"] An overview of the Fellows Ave monitoring station along Meadowbrook Creek.
Read More
Lancaster County Makes the Switch to Real-Time Water Quality Monitoring Systems
Continuous data collection in Lancaster County, Pennsylvania, started about 5 years ago, and the county will be making a major upgrade over the next year—switching from relying solely on the internal storage of water quality sondes to telemetry units that enable real-time data viewing. [caption id="attachment_39295" align="alignnone" width="940"] The first telemetry unit was installed at LCCD along Little Conestoga Creek. (Credit: Tyler Keefer / LCCD) [/caption] Telling Lancaster County's Story Through Data Since the Lancaster County Conservation District started monitoring county waterways, the goal has remained the same, according to Amanda Goldsmith, Watershed Specialist for the Watershed Department.
Read More
