HOBO 6 ft Stainless Steel Temperature Probe

A food-grade stainless-steel temperature probe with a pointed tip for use with HOBO U series loggers, UX120-006M loggers, or ZW series wireless data nodes.
Your Price $125.00
Stock Check Availability  
Key Features
  • Response time is 3 minutes typical to 90% in air moving 1m/sec (2.2mph)
  • Response time in stirred water is 15 seconds typical
  • Sensor is attached to a 1.8m (6ft) cable
A food-grade stainless-steel temperature probe with a pointed tip for use with HOBO U series loggers, UX120-006M loggers, or ZW series wireless data nodes. Accuracy and resolution vary according to the attached logger model. Measurement range is -40° to 100°C (-40° to 212°F) in air or water. Response time is 3 minutes, typically to 90% in air moving 1m/sec (2.2mph). The response time in stirred water is typically 15 seconds. The sensor is attached to a 1.8m (6ft) cable. Note: The stainless steel probe is waterproof, but the handle is not intended for prolonged use in water or moist environments, especially those with temperatures greater than 30°C (86°F). For more details, contact HOBO or an authorized dealer.

Measurement range: -40° to 100°C (-40° to 212°F)
Accuracy:
w/U12: ±0.25°C from 0° to 50°C (±0.45°F from 32° to 122°F), insert probe 5.08 cm (2 inches) minimum;
w/ZW: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), insert probe 5.08 cm (2 inches) minimum;
w/UX120-006M, MX1104 and MX1105: ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F), insert probe 5.08 cm (2 inches) minimum;
Resolution:
w/U12: 0.03° at 20°C (0.05° at 68°F);
w/ZW: 0.02°C at 25°C (0.04°F at 77°F);
w/UX120-006M, MX1104 and MX1105: 0.002° at 25°C (0.003° at 77°F);
Drift: <0.1°C (<0.2°F) per year
Response time in air: 3 min. typical to 90% in air moving 1 m/sec (2.2 mph)
Response time in stirred water: 15 sec. typical to 90%.
Probe dimensions: 102mm (4 in.) food-grade stainless steel probe with pointed tip; 3.2mm ±0.25mm (0.12 inches ±0.01) diameter
Cable length: 1.8m (6 feet)

Note: The stainless steel probe is waterproof, but the handle is not intended for prolonged use in water or moist environments, especially those with temperatures greater than 30°C (86°F). For more details, contact HOBO or an authorized dealer.

Questions & Answers
No Questions
Did you find what you were looking for?
Key Features
  • Response time is 3 minutes typical to 90% in air moving 1m/sec (2.2mph)
  • Response time in stirred water is 15 seconds typical
  • Sensor is attached to a 1.8m (6ft) cable
A food-grade stainless-steel temperature probe with a pointed tip for use with HOBO U series loggers, UX120-006M loggers, or ZW series wireless data nodes. Accuracy and resolution vary according to the attached logger model. Measurement range is -40° to 100°C (-40° to 212°F) in air or water. Response time is 3 minutes, typically to 90% in air moving 1m/sec (2.2mph). The response time in stirred water is typically 15 seconds. The sensor is attached to a 1.8m (6ft) cable. Note: The stainless steel probe is waterproof, but the handle is not intended for prolonged use in water or moist environments, especially those with temperatures greater than 30°C (86°F). For more details, contact HOBO or an authorized dealer.

Measurement range: -40° to 100°C (-40° to 212°F)
Accuracy:
w/U12: ±0.25°C from 0° to 50°C (±0.45°F from 32° to 122°F), insert probe 5.08 cm (2 inches) minimum;
w/ZW: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), insert probe 5.08 cm (2 inches) minimum;
w/UX120-006M, MX1104 and MX1105: ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F), insert probe 5.08 cm (2 inches) minimum;
Resolution:
w/U12: 0.03° at 20°C (0.05° at 68°F);
w/ZW: 0.02°C at 25°C (0.04°F at 77°F);
w/UX120-006M, MX1104 and MX1105: 0.002° at 25°C (0.003° at 77°F);
Drift: <0.1°C (<0.2°F) per year
Response time in air: 3 min. typical to 90% in air moving 1 m/sec (2.2 mph)
Response time in stirred water: 15 sec. typical to 90%.
Probe dimensions: 102mm (4 in.) food-grade stainless steel probe with pointed tip; 3.2mm ±0.25mm (0.12 inches ±0.01) diameter
Cable length: 1.8m (6 feet)

Note: The stainless steel probe is waterproof, but the handle is not intended for prolonged use in water or moist environments, especially those with temperatures greater than 30°C (86°F). For more details, contact HOBO or an authorized dealer.

Questions & Answers
No Questions
Did you find what you were looking for?

Select Options

  Products 0 Item Selected
Image
Part #
Product Description
Price
Stock
Select
HOBO 6 ft Stainless Steel Temperature Probe
TMC6-HC
6 ft stainless steel temperature probe
$125.00
Check Availability  
$125.00
Notice: At least 1 product is not available to purchase online
×
Multiple Products

have been added to your cart

There are items in your cart.

Cart Subtotal: $xxx.xx

Go to Checkout

Customer Stories

Loading...